Propeller Line Guards
Features & Benefits
No More Ruined Fishing Trips!
Brag to your fishing buddies about the “Big One” you
landed instead of crying about the one that got away…
Here’s the Secret… add an easy to install and affordable
line guard to your inboard or outboard motor and keep the elusive fish
you just hooked from getting your line all snarled up in your exposed
prop!
Benefits of Using Our Fishing Line Guards
- Keep fishing lines & downriggers out of your prop
- Protect your skeg and prop from unnecessary damage in shallow
water & rivers
Enhanced Control & Maneuverability…
- Better steering at slow trolling speeds (line guard acts like
a rudder)
- Increased your props efficiency in all conditions
- Reverse thrusting is dramatically increased
Important: Check with your insurance company, an Adventure
Marine Propeller Line Guard may qualify for an insurance premium reduction!
Adventure 9000-4 Series Propeller Line
Guard
This "Propeller Line Guard" is designed for the
serious fisherman. Also will protect propeller and skeg from damage
in shallow water. Ideal accessory to keep lines and downrigger wires
away from propeller. 4" wide stainless steel band complete
with "Pressure Relief Ports" to enhance performance.
10 gauge heavy duty protection for propeller. Also increases
efficiency of propeller. All stainless steel mounting hardware included.
Entire unit electropolished for extra long life. Nine sizes
from 7" to 16" propeller diameter.
**Important: Check with your insurance
company, an Adventure Marine Propeller Line Guard may qualify for
an insurance premium reduction!
For more information on propeller safety, please read our article
on
Boating Safety. Questions? Check
out our Frequently Asked Questions
on our Propeller Line Guard.
|
45 pound spring salmon
caught at Painter's Lodge Cambell River, BC.
August 2002
|
Any questions?
Call us toll free
1-888-669-4300
Dimension "A"

|
How
To Select Correct
Propeller Guard
Measure distance from under anti-cavitation
plate to the bottom of the skeg.
See Dimension "A" on
drawing.
-
Example: If this distance measures 12", the Guard
diameter should be 12".
Select: Model 91112 Safety Guard
The propeller diameter is always less than the distance from
under the anti-cavitation plate to the bottom of the skeg, usually
at least 1" to allow for 1/2" clearance below the anti-cavitation
plate and 1/2" above the bottom of the skeg. To select
guard size by propeller diameter only is not recommended. The
above mentioned example is the correct selection guide.
|
Boat Propeller Line Guard Testimonial
P.R.I. "Rescue Training Specialists" installed a Propeller
Line Guard on our 14' Inflatable Rescue Boat last season, for use in our
swiftwater rescue training programs. Not only has the guard prevented
costly damage to our prop in swallow water exercises and minimized risks
to swimmers and divers, but our experience also indicates that it has
minimized problems with cavitation and has improved overall performance.
We now recommend your Propeller Line Guard for use on rescue boats owned
by agencies taking our training programs.
Wayne A. Sundmacher Sr., MICP, NREMT-P
P.R.I. "Rescue Training Specialists"
17 Terrill Avenue, Hamilton, NJ 08619-1329
Phone: (609) 586-8366
Fax: (609) 586-8985
www.swiftwater-rescue.com
Boat
Propeller Line Guards |
|
Model |
|
|
90709-4 |
9" |
7" to 8" |
90910-4 |
10" |
8" to 9" |
91011-4 |
11" |
9" to 10" |
91112-4 |
12" |
10" to 11" |
91213-4 |
13" |
11" to 12" |
91314-4 |
14" |
12" to 13" |
91415-4 |
15" |
13" to 14" |
91516-4 |
16" |
14" to 15" |
91617-4 |
17" |
15" to 16" |
|
|
The actual propeller diameter is not the
accurate measurement for the guard selection. Please refer
to above chart and the diagram to determine
the accurate measurement for correct Propeller Guard selection. |
ATTENTION:
| Recommended |
Max. HP
|
Max. MPH
|
Max. K/Hr
|
| 90709-4 |
8
|
30
|
48
|
| 90910-4 to 91415-4 |
120
|
40
|
64
|
| 91516-4 & 91617-4 |
200
|
30
|
48
|
|
|

|