|
|
Dinghy Accessories
Model
3000 Dinghy Swivel Motor Bracket  Features & Benefits
“A Practical Solution For Your
Outboard Dinghy Motor Problems” Imagine how hassle free it would be to leave your outboard motor
on your dinghy at all times. Instead of taking the motor off and
on everytime you use it. The sturdy and practical Dinghy Swivel Bracket Model 3000 has
made that possible.
|
- Designed for Inflatables & Hard-shell Dinghies
- Allows you to leave your motor on Dinghy when raising Dinghy
to vertical position
- Two locking positions ( 90 degree and 45 degrees)
- Eliminates the need to store you motor elsewhere on your boat
- No spilling of fuel or oil
Designed for Inflatable and Hard Shell Dinghy's, 90 degree and
45 degree positions. Max. 9.9 HP 2 stroke,
max. weight: 100 lbs. This "swivel" bracket allows the
boater to leave the outboard motor on the dinghy when raising the
dinghy to the vertical
position on swim step.
Eliminates need for storage of motor, no spilling of fuel or
oil. No need in rough seas to take risks to remove motor. High grade Marine
aluminum alloy, anodized clear. All fasteners stainless steel.
Polypropylene motor mount. Stainless steel mounting hardware included.
Mounting flange 7" high by 8' wide. Depth 7" from mounting
flange to end of motor mounting board. Shipping weight: 8 lbs.
4 oz.
|
Model
3000 Dinghy Swivel Motor Bracket |
|
Or Order by Phone:
Toll Free 1-888-669-4300 |
Please click on image to enlarge |
Model
6000 Dinghy Hauler Davits For Inflatables
 Features & Benefits
Dinghy Hauler Davits for
Inflatable Model 6000 Boating Accessory
For the power boater, if you have a Zodiac or Inflatable
boat and are tired of towing it, or lifting it up on deck there
is an easier way. The Adventure Dinghy Hauler Davit System
allows you to easily carry your Zodiac
or inflatable boat on the swim-step of your boat.
-
No gluing of fittings onto tubes of inflatable
-
Two retainers cradle your dinghy securely
in place
-
Quickly and easily raise and lower your
dinghy
-
Corrosion proof stainless steel construction
and electro polished for long life
|
Model
6000 Dinghy Hauler Davits For Inflatables
|
|
Or Order by Phone:
Toll Free 1-888-669-4300
|
|
Dinghy
Hauler Davits - Reinforcement
Plate
|
|
Or Order by Phone:
Toll Free 1-888-669-4300
|
|
Want to Extend The Reach of Your Swim
Platform?
Please click on image to enlarge
 Use
extensions to push your Model 6000 Davit System farther outboard
aft to give you more room on your swim platform. These
18" extensions offer you another 12" of room and are
also convenient if you need to install the davit system on a swim
platform with out obstructions, hardware and other items that may
be in the way of installation and use.
Davit Mount Extensions (set
of 2 bars) comes
in 18" & 12" Lengths
These stainless steel electropolished extensions with
Model 6000 davit system for added room on your swim platform.
Mounts on top of swim platform to move davits 12" outboard
past aft edge of swim platform. Designed
to carry inflatable dinghy on swim step of boat. No gluing of
fittings on inflatable. Stainless steel retainers "cradle" the
inflatable securely in place.
 Easy
installation. Constructed of marine grade stainless steel
and electropolished for extra
protection. Dinghy
may be pulled tight against transom of boat and lifting lines
used to secure dinghy with lines to cleats of boat. Optional stand-off's
are recommended to keep dinghy in upright position on swim step.
Stand-off available in 18", 24", 30 " and 36" lengths.
Maximum weight 300 lbs. Support pads, 3" wide by 12" long
are welded to bottom section of retainers for extra support for
inflatable. Retainers will accommodate inflatable tubes 15" to
17" in diameter. Shipping weight: 8 lbs. 3 oz.
Davit System Model 6000 is shown with 18" extensions |
 |
 |
 |
| | Please click on image to enlarge |
|
|
|
Or Order by Phone:
Toll Free 1-888-669-4300
|
|
Model
2100 Quick Release Launching Wheels
Features & Benefits of
the 2100 Deluxe Model
 For
the experienced boater we’ve added a very
popular feature called our “Spring Loaded Lock In” for
even greater ease of use.
This handy feature lets you easily lock your wheels into their
lower and upper position by simply "Snapping" the spring-loaded
pin into place. (No more fiddling to locate pin into holes especially
in the lower position.)
One-person boat launching is fast & easy
-
Quick adjustments (Wheels swing up and down
with Quick Release pin locking)
-
Flexibility (Wheels may be removed after launching
if desired)
-
4X4 over obstacles with big 16" x 4” diameter
pneumatic tires
-
Rugged long lasting design (Heavy-duty one
piece injection molded rim)
-
Quality finish (all aluminum components made
with long lasting marine grade alloy)
 Wheels lock into upper and lower position simply by "snapping" into
place. Designed for Inflatables, Aluminum and Hard-Shell
Boats. Launch the boat by yourself - comfortably - with Quick-Release
Launching Wheels. Designed to be moved into the raised position
after launching or to be totally removed after launching by simply
pulling a quick release pin.
 No tools required. Heavy duty 4" by 16" pneumatic
tire and solid
one-piece injection molded rim. Constructed of marine grade aluminum,
anodized for long life, all stainless
steel fasteners. Mounting fasteners supplied. Easy installation.
Recommended max. weight 300 lbs. U-channel mounting side: 12" long
by 3 1/4" wide. Recommended tire pressure 30 lbs. Shipping
weight: 15 lbs.
|
Model
2100 Quick Release Launching Wheels |
|
Or Order by Phone:
Toll Free 1-888-669-4300 |
|
Model 2000 E-Z Roller Launching
Wheels
|
Features & Benefits
“1 Person Boat Launching Made
Easy”
Start effortlessly launching your Zodiac or Inflatable boat
over soft sand, gravel, at low tide or over longer distances.
There’s more. Returning your Zodiac or inflatable back
to your vehicle is also a snap!
You can end your boat launching hassles forever! Purchase the
ultimate boat launching wheels from Adventure Marine. Read the
details below.
Model 2000 Basic Boating Accessory
-
One-person boat launching is fast & easy
-
Quick adjustments (Wheels swing up and down with Quick Release
pin locking)
-
Flexibility (Wheels may be removed after launching if desired)
-
4X4 over obstacles with big 16" x 4” diameter
pneumatic tires
-
Rugged long lasting design (Heavy-duty one piece injection
molded rim)
-
Quality finish (all aluminum components made
with long lasting marine grade alloy)
Designed for Inflatables, Aluminum and Hard Shell boats. Launch
the boat by yourself -- comfortably - with EZ-Roller Launching
Wheels. Designed to be moved into the raised position after launching
or to be totally removed after launching by simply pulling the
quick release pins.
No tools required. Heavy-duty 4" by 16" pneumatic
tires and solid one-piece injection molded rim. Constructed of
marine grade aluminum, anodized for long life, all stainless
steel fasteners. Mounting fasteners supplied.
Easy installation. Recommended max. weight 300 lbs. Recommended
tire pressure 30
PSI. Shipping weight: 15 lbs
Model
2000 E-Z Roller Launching Wheels |
|
Or Order by Phone:
Toll Free 1-888-669-4300 |
|
Model 5000-A Adjustable
Seat For Inflatables
|
Features & Benefits
Please Have a Seat… Exactly Where
You Want!
Comfortably and safely seat yourself
and your passengers. Zodiacs
and Inflatable boats have one seat permenantly positioned for
rowing. When you add an outboard motor you end
up sitting
in the back
of the inflatable on the tubes.
This is not only very uncomfortable, but dangerous too. Adding
an adjustable boat seat eliminates these two problems
for you and give you the ability to comfortably seat more people.
Benefits
-
Adjustable from 26” to 37” in 1” increments,
comfortable 10” wide
-
Seat fits firmly between tubes
-
Fits 15-18” diameter tubes
-
Flexible positioning anywhere in straight section of inflatable
-
Eliminate a stiff neck! No more sitting on
tubes to run your outboard motor
Please click on image to enlarge
Adjustable seat design for inflatables. Adjustable from
26" to 37" in 1" increments. 10" wide.
aluminum construction. Electrostatically powdercoated in
white colour. Seat fits firmly between tubes 15" to
17" diameter and can be positioned anywhere in boat.
For rowing, for operating the motor, or for passengers
to sit wherever they please. Easy to mount fishing seat
with back and arm rests on top of 5000-A seat. 200 lbs
maximum capacity in centre of 5000-A seat. Shipped in four
sections, assembled in 10 minutes. Box sizes 30" by
10" by 6".
BUY IT NOW for ONLY $298.00 US
|
 |
 |
Model
5000-A Adjustable Seat For Inflatables |
|
Or Order by Phone:
Toll Free 1-888-669-4300 |
|
Model 8000 Stand-Offs For
Inflatables
|
|
Features & Benefits
May be used with Model 6000 Dinghy Hauler and Model 7000 Dinghy
Davits. Made of 1/2" diameter 6061 - T6 aluminum rod, powder
coated white, stainless steel end fittings, available in 4 sizes.
|
|
8000 - 18" Shipping
weight: 1 lbs. 8 oz.
8000 - 24" Shipping weight: 2 lbs.
8000 - 30" Shipping weight: 2 lbs. 4 oz.
8000 - 36" Shipping weight: 2 lbs. 8 oz. |
Model
8000 Stand-Offs For Inflatables |
|
8000 - 18" |
|
|
8000 - 24" |
|
|
8000 - 30" |
|
|
8000 - 36" |
|
|
Or Order by Phone:
Toll Free 1-888-669-4300 |
|
|
|
 |
